| ID |
Date |
Author |
Type |
Category |
Subject |
Status |
Text |
 |
|
278
|
Thu Jan 16 22:06:39 2020 |
tions applied to solve this issue :Martin Will, Thierry Le Flour | Telescope Operations | Software | Semi-Expert Drive GUI not connecting / MOS server not working | Fixed | In the late afternoon shifters noticed
the semi-expert drive GUI was not updating,
several restarts did not help. Checking into |
|
|
269
|
Sat Jul 27 11:11:08 2019 |
Yusuke, Satoshi, Tomo, Yoshiki | Other | | GUI stacked due to a wrong shutdown procedure | | Drive GUI stacked due to a wrong shutdown
procedure (Jul. 27th 01-02UTC). This was
simply a human error. |
|
|
268
|
Tue Jul 23 13:50:43 2019 |
Yusuke, Patricia | Problem Fixed | | Reboot Flywheel PLC | | Regarding the problem on the Flywheel PLC
(see
here), we entered UC1 under the supervision of Daniel |
|
|
267
|
Mon Jul 22 23:07:20 2019 |
Yusuke, Daniel K., Mitsunari, Satoshi, Tomo, Juan Abel, Yoshiki | Telescope Operations | | Flywheel PLC down | | After finishing the normal start-up procedure,
we tried to park out by GUI, but got an error
(22:30 local time): "MSG_WARNINGPark_Out_TimeOut" |
|
|
1
|
Fri Jan 18 10:14:51 2019 |
Thierry Le Flour | Software Installation | General | Initlisation of the DRIVE logbook | | Here is the first entry in the DRIVE ELOG
logbook |
|
|
264
|
Sat Jul 6 23:17:54 2019 |
Moritz, Dirk | Telescope Operations | | Park-in problems | | When parking in the telescope, accidently
hit "Shutdown" button instead of
"Parkin" in Drive Semi-epert GUI. |
|
|
265
|
Tue Jul 9 00:46:52 2019 |
Mitsunari, Yukiho, Noah, Moritz | Telescope Operations | Issues | Park-in problems | | At parking in, the telescope got stuck
at 94.254°. We checked in the container
that fuse Q21 went off. We did not see any |
|
|
266
|
Fri Jul 19 23:06:13 2019 |
Mitsunari, Tomohiro, Satoshi, Moritz, Yusuke | Telescope Operations | Issues | Telescope stuck in strange state/lost control by Semi-Expert GUI | | Tonight, we tracked Vega to test (a correction
of) the pointing offset of the Drive.
Around 22:30UTC, we tried different |
|
|
273
|
Sun Nov 24 19:33:56 2019 |
Mathieu David Armand | Telescope Operations | General | CDM images for bending model | | - CDM images at park out position.
Exposure 100ms.
OARL on. |
|
|
274
|
Mon Nov 25 22:53:22 2019 |
Mathieu David Armand | Telescope Operations | | CDM images 19/11/25 | | Mg=1.25
DenebDark 60x1s
RA-2
TestTracking 60x1s Displacement
from Deneb RA-2
Deneb 60x1s
DenebLed |
|
|
276
|
Wed Nov 27 21:27:29 2019 |
Mathieu David Armand | Telescope Operations | | CDM & SG images with alternative target | | |
|
|
272
|
Thu Sep 19 19:10:39 2019 |
Martin, Ino, Thierry, Quentin, Thomas | Tracking Debugging | | Star images with various Az and Zd offsets | | We tracked stars at various zenith angles
and changed the Az and Zd offsets, taking
images with the PSF camera for each position. |
|
|
2
|
Tue Jan 22 09:37:03 2019 |
Ino Monteiro | PLC Software and Configuration | Software | Installation new PLC version | | Installation of the new PLC code and re-initilalisation
of the system. |
|
|
279
|
Mon Feb 10 14:57:56 2020 |
Ino + Gael + Thierry | Other | Hardware | Azimuth Locking System | Fixed | Last week we put in sevice the new ALS
completly modified:
_ Main System with new reducer. |
14x |
|
249
|
Thu Apr 18 09:10:29 2019 |
Ino | PLC Software and Configuration | Hardware | Offset of the Zero Azimuth | | After pointing Polaris yesterday, it seems
that the zero position of the telescope was
incorrect but It's never had been calibrated |
|
|
254
|
Wed Jun 26 20:06:22 2019 |
Ino | PLC + Control Software debugging | | Tracking Trajectory | | We sent a tracking with with RA211,08 and
DEC29,52
1st time the goto position of azimuth |
|
|
Draft
|
Thu Jun 27 12:04:43 2019 |
Ino | Problem Fixed | General | | | During this 2 weeks we solve this problems:
_ Park In: Sometimes the final
locking position was too limit and the "In |
|
|
256
|
Thu Jun 27 12:19:02 2019 |
Ino | Problem Fixed | General | PLC Status | | During this weeks we solve this problems:
_ Park In: Sometimes the final
locking position was too limit and the "In |
|
|
243
|
Thu Mar 28 10:34:41 2019 |
Drive Team- Ino&Thierry&Armand + Juli (IFAE) | Telescope Operations | | High speed drive tests | | new session of high speed drive tests after
issues with Power Supply.
Tests of emergency stop |
|
|
237
|
Wed Mar 6 10:54:33 2019 |
Drive Team- Ino&Thierry&Armand | Telescope Operations | General | DRIVE : High Speed tests | |
The FW issue is not solved . No
movement can be done
The FW is
going to be restarted ==> It takes several |
|